|
|
|
#1
03-31-2007, 11:26 AM
|
||||
|
||||
|
3" Exhaust for the Bronco
Don't waste your money on duals, go with a 3" exhaust system and be done with it.
|
|
#2
03-31-2007, 11:58 AM
|
||||
|
||||
|
exactly, I'm gutting my first cat, Cutting off the second, and running a glasspack with the M30001 pipe. And YES, it IS LEGAL where I am.
__________________
~Dave~ 1989 FSB eddie bauer 302 efi, AOD, BW1356, and other stuff--Sold :cry 1997 Dodge Ram sport 4x4, 318, 3" rancho lift, 35"s, powertrax rear locker, LS front, kickass sound system, exhuast, lights, other goodies
|
|
#3
03-31-2007, 03:12 PM
|
||||
|
||||
|
OK so I started with a 3" High Flow Cat.
  3" Mandrel Bent Tailpipe I used (30 bucks!!) : maremont part number is M30001, the Autozone sku for that part is 577061.  Fitting it all together thats a Flow Master 50 all 3"  The Muffler    Heres the old Flow Master 40 and the hack of a job to the tailpipe, it was due for a replacement.  Heres the back of the old cat, I'll be cutting that of flush to the back of the cat.  And off she came  Looking down the Y pipe  3" cat slides right on to the Y pipe    Used a short piece of 3" pipe to join the muffler    bent this little hanger up to weld onto the tail pipe      
|
|
#4
03-31-2007, 10:02 PM
|
||||
|
||||
|
looks good, so how's it sound?
__________________
~Dave~ 1989 FSB eddie bauer 302 efi, AOD, BW1356, and other stuff--Sold :cry 1997 Dodge Ram sport 4x4, 318, 3" rancho lift, 35"s, powertrax rear locker, LS front, kickass sound system, exhuast, lights, other goodies Last edited by JD_bronco; 03-31-2007 at 10:06 PM..
|
|
#5
04-03-2007, 07:25 PM
|
||||
|
||||
|
Sounds really cool
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
